Intune DCX Jeep, Chrysler & Dodge Tuning Device

Jeep, Chrysler & Dodge Intune I-1000-DCX Tuning Device by Diablosport
$ 1000.00
Trinity Jeep, Chrysler & Dodge Tuning Device

Description

Jeep, Chrysler & Dodge Intune I-1000-DCX Tuning Device by Diablosport

 

The price includes email support regarding use of the device. Ther device is supplied with a custom tune service for Petrol vehicles supported by this device. Plus we can also Dyno Tune these vehicles in person for an extra fee.

 

It can add horsepower and torque to your car or truck using DiabloSport’s dyno tested performance tunes! These tunes are pre-loaded in to each inTune unit specifically to increase your power, economy, and drivability.
The tunes work great whether on a stock vehicle, or even mildly modified (like a cat back exhaust and cold air intake).


InTune always saves a copy of the vehicle’s factory data in its memory in case it needs to be serviced at the dealership at some point in the future. That means you always have a copy of your vehicle data on your tuner and once it’s restored it leaves no footprints or watermarks in the vehicle’s computer.

Untitled3

Tune Options

inTunes’ tunes modify spark and fuel tables, throttle response, and shifting along with other important engine parameters that increase performance and economy.

 

93 Octane "Diablo" Tune

  • Average 15-40 HP
  • Maximize HP & TQ
  • Improves Drivability
  • Increase Fuel Economy

91 Octane Performance Tune

  • Average 13-35 HP
  • Requires 91 Octane Fuel ²
  • Increase HP & Torque!

 

87 Octane Performance Tune

  • Average 12-30 HP
  • Maximizes Performance
  • 87 Octane Fuel

MPG Booster Tune

  • Average 2-3 MPG
  • Economy Mode

Factory HP Tune

  • Calibrate Speedometer
  • Remove Top-Speed Limiter
  • Support Aftermarket Gears
  • Support Aftermarket Wheels

 

 

 

Diesel Tune Options

Diesel trucks have massive horsepower and torque potential that can be unlocked just by programming the vehicle's Powertrain Control Module (PCM). Your truck may have tunes for any of the following:

 

Towing Tune

  •  Gain 40-60 HP ⁵
  • Add up to 100 Ft/Lbs TQ ⁵
  • Increased MPG Highway
  • Tow Heavy Loads

 

Economy

  • Additional 60-100 HP ⁶
  • Add up to 180-200 Ft/Lbs TQ
  • Gain 2-3 MPG
  • Tow 6,000-8,000 Lbs

 

Performance/Economy

  • Additional 80-100 HP ⁶
  • Add up to180-200 Ft/Lbs TQ
  • Gain 2-3 MPG
  • Tow 6,000-8,000 Lbs

 

 

Data Logging

 

For today’s fuel injected vehicles data monitoring is an essential part of the tuning process. In the old days, mechanics and technicians hooked up sensors to vehicles to find out what was going on under the hood, but today computers do all of this seamlessly.
‘96 and newer Ford, GM, and Chrysler made vehicles use a special protocol system called OBD‐II to send information to diagnostic equipment and monitor vehicle data. OBD‐II is the modern way technicians find out if it is time for an oil change, if you need a new rear O2 sensor, or if your vehicle is having issues with spark knock/ detonation. Your vehicle’s computer monitors many parameters each second to make sure that the engine is running at the most efficient performance level. The ECU uses this information to alter things like fuel, spark advance, or boost to keep a vehicle running smoothly.
Automotive tuning shops and inTune owners can use this information while tuning on the dyno or the street to make the highest possible horsepower, best fuel economy, and better drivability when towing. Parameter data is used to calibrate aggressive tunes and allows users to make sure the vehicle is running safely. More precise monitoring solutions yield a more precise tune.
Not only can the inTune record up to 30 minutes of this high speed data, but it can also be used as a "pass through" device to log this data on your PC using DiabloSport free Data Viewer Software! The Data Viewer software allows access to additional PIDs, longer log time, and more advanced functions such as virtual gauges and more!

 

Data Logging Features

InTune can log data to it's internal memory which can be transfered via USB to your PC so it can be emailed to a tuner shop, or viewed on our Data Viewer Software! Additionally, the inTune can record two additional 5 Volt Analog inputs- perfect for watching and recording external sensors such as wide band O2, EGT, and much more. 

  • Logging Capabilities

  •  Logs 30 Minutes of Data
  •  5 Volt Sensor Inputs
  •  OBD-II Data Streaming to PC
  •  Pre-set PID Lists
  • Integrated PC Logging Software

The DiabloSport Data Viewer Software is a free download for windows based PCs on win XP and later! Data Viewer allows un-parralleled options for logging OBD-II Data from an ECU, streamed directly from the inTune! Click Here to download the DiabloSport Data Viewer Software now!
  • Key Data Viewer Features

  •  Log More Parameters
  •  Direct Streaming to PC
  •  Integrated Gauges
  •  Advanced PID Selections
  •  More Logging Time
 
 

 

 

 

 

 

Reviews

There are yet no reviews for this product.