Access to the Vehicle
A thief first gains access to the cabin and locates the factory diagnostic connection.
Sale!
VF OBD Anti-Theft Programmed BCM Lock
You can order online where available, and for major parts, packages or workshop services, we recommend contacting Oztrack first to confirm suitability and any vehicle-specific requirements.
Original price was: $425.00.$400.00Current price is: $400.00.
VF COMMODORE AND GEN-F HSV OBD SECURITY
Protect Your VF Commodore from OBD Key Programming Theft
Oztrack programs the VF Body Control Module to block unauthorised theft-related OBD programming.
VF Commodores and Gen-F HSV models are often targeted because thieves may attempt to connect programming equipment through the diagnostic port and add another key.
The Oztrack BCM lock is designed to stop that unauthorised key programming process while allowing the vehicle to operate normally.
BCM security lock
Blocks unauthorised theft-related programming.
Normal vehicle use
The car starts and drives normally with its existing keys.
Workshop or remote
Available in Penrith or through our live postal service.
Fast workshop service
Programming usually takes less than 30 minutes.
VF Commodore BCM Security Programming
Every BCM security lock is completed by Oztrack using professional programming equipment in our Penrith workshop or through our live remote programming service.
SEE HOW THE PROTECTION WORKS
VF Anti-Theft BCM Lock Demonstration
This video shows the effect of the Oztrack BCM security programming on a VF Commodore.
Once programmed, unauthorised equipment cannot complete the normal theft-related OBD key programming process.
- No permanent visible modification inside the vehicle
- Existing keys continue to operate normally
- Diagnostic trouble codes can still be read and cleared
- The ECU can still be logged and tuned
WHY THIS PROTECTION MATTERS
How OBD-Based VF Theft Can Occur
The factory diagnostic port is needed for servicing and fault diagnosis. It can also provide access to vehicle programming systems if the correct protection is not in place.
Programming Equipment Connected
Unauthorised equipment may then be connected in an attempt to access key and theft-security functions.
Another Key Is Added
Without extra protection, the attacker may try to program another key and start the vehicle.
The Oztrack BCM lock targets this programming pathway
It does not replace sensible security measures such as secure parking, steering locks, alarms or tracking devices. It adds another strong layer aimed specifically at unauthorised OBD programming.
SECURITY WITHOUT AFFECTING NORMAL USE
What Changes After the BCM Is Locked?
Blocked Security Functions
- Unauthorised key-programming attempts
- Theft-related BCM programming access
- Common OBD key-add procedures used during theft
Normal Workshop Functions
- Start and drive with existing programmed keys
- Read and clear diagnostic trouble codes
- Log engine and transmission data
- Read and tune the engine ECU
- Complete normal servicing and repairs
TWO WAYS TO COMPLETE THE SERVICE
Choose Workshop or Live Remote Programming
Penrith workshop
Programming at Oztrack
Bring your VF Commodore or Gen-F HSV to our Penrith workshop. Oztrack completes the programming and confirms correct operation.
- Completed by Oztrack at our workshop
- Usually takes less than 30 minutes
- Existing keys checked after programming
- No remote computer setup required
Australia and New Zealand
Live Postal Programming Service
Oztrack can also complete the service live while the supplied interface is connected to your vehicle and a Windows laptop.
- Available to suitable customers across Australia and New Zealand
- Internet-connected Windows laptop required
- A person must remain with the vehicle during the session
- Oztrack guides the process live
- Device return options follow the current product terms
SIMPLE WORKSHOP PROCESS
What Happens During the Appointment?
Confirm the Vehicle
We confirm the VF or Gen-F model and check that the existing keys and security system operate correctly.
Connect the Programming Equipment
Oztrack connects the approved interface and prepares the Body Control Module for security programming.
Program the BCM Lock
The required anti-theft security changes are written to the vehicle.
Test Normal Operation
We check that the existing keys, starting system and normal vehicle functions still operate correctly.
IMPORTANT OWNER INFORMATION
What Happens When You Need Another Key?
New Keys Require the BCM to Be Unlocked
The security lock prevents the normal key-add process. If you need another key programmed later, the BCM must first be temporarily unlocked.
Keep Every Existing Key Safe
Make sure you know where all programmed keys are before the BCM lock is completed. Contact Oztrack before replacing, adding or changing keys.
VEHICLE COVERAGE
Which Vehicles Can Be Protected?
The service is intended for compatible VF Commodore and Gen-F HSV vehicles. Contact Oztrack if the BCM, keys or security modules have previously been replaced.
VF Commodore
Compatible VF sedan, wagon and utility models can be checked for this service.
Gen-F HSV
Compatible Gen-F HSV vehicles can also be protected using the BCM lock.
Modified Vehicles
Engine modifications and ECU tuning generally do not prevent the BCM security service from being completed.
VF COMMODORE EXPERIENCE
Why VF Owners Choose Oztrack
Oztrack works with VF Commodore and Gen-F HSV electronics, diagnostics and tuning systems every week.
The BCM security lock is completed by a workshop that understands how the vehicle’s security, key, diagnostic and engine-control systems work together.
Completed by Oztrack
The BCM programming is completed or supervised directly by Oztrack.
VF Diagnostic Experience
We regularly diagnose, tune and repair VF Commodore and HSV electrical systems.
Normal ECU Access Remains
Engine tuning, data logging and normal fault-code access remain available.
Workshop or Remote Service
Choose programming at Oztrack or a suitable live postal service.
COMMON QUESTIONS
VF BCM Anti-Theft Lock FAQs
Will the car still start with my existing keys?
Yes. The vehicle should continue to start and operate normally with its existing programmed keys.
Can the vehicle still be tuned after the BCM is locked?
Yes. Engine ECU reading, data logging and tuning are not normally blocked by this BCM security programming.
Can a mechanic still read and clear fault codes?
Yes. Normal diagnostic code reading and clearing remain available.
How long does the workshop service take?
The programming process usually takes less than 30 minutes when the vehicle and existing security system are operating correctly.
Can I have another key programmed later?
Yes, but the BCM must first be unlocked so the new key can be added. Contact Oztrack before arranging key programming.
Does the BCM lock guarantee that the car cannot be stolen?
No single security measure can guarantee that. The BCM lock is designed to block a common OBD key-programming theft method and should form part of a layered vehicle-security plan.
Is the service available outside Sydney?
Yes. A live postal programming option is available for suitable customers in Australia and New Zealand.
Does the remote service require a computer?
Yes. You need a suitable Windows laptop, an internet connection and someone available at the vehicle during the live session.
PROTECT YOUR VF COMMODORE
Book Your Oztrack BCM Security Lock
Select workshop programming or the live postal service using the product options above.
Calculate Your Upgrade Budget
Planning to enhance your vehicle’s performance with Oztrack? Use our Loan Calculator to estimate your upgrade budget. Discover convenient financing options through our partner, Verified Lending, and bring your dream upgrades to life. Start calculating today!
[loan_calculator]
